PIPE TEE – EQUAL TEE | REDUCING TEE CARBON,ALLOY, STAINLESS STEEL EQUAL / REDUCER TEE

Butt-weld Pipe Tee Production Range – Equal Tee, Unequal Tee （Reducing Tee） 

Outside Diameter:Seamless Pipe Tee （ 1/2″～24″）， ERW / Welded/ Fabricated Pipe Tee （1/2″～48″）

Types: Equal Tee , Reducing Tee

Wall Thickness: 3mm– 40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80,SCH120, SCH140, SCH160, XXS

Production Grades: Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low temperature Steel, Carbon Steel,Cupronickel

Manufacturing Standards – Pipe Tee

ASME: ANSIB16.9, ANSI B16.28, MSS-SP-43

DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011EN: EN10253-1, EN10253-2

ASTM A403 – ASME SA403 – StandardSpecification for Wrought Austenitic Stainless Steel Piping Fittings

ASME B16.9 – Factory-MadeWrought Fittings Butt-welding

ASME B16.25 – Butt-welding Ends

 ASME B16.28 – ‘Wrought Steel Short Radius Elbows and Butt-welding Returns’

MSSSP-43 – ‘Wroughtand Fabricated Butt-Welding Fittings for Low Pressure, Corrosion ResistantApplications

Pipe Tee Material Grades

Stainless Steel Tee; ASTMA403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L

Carbon Steel Tee: ASTMA 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.

Low Temperature Carbon Steel Tee: ASTM A420 WPL3, A420 WPL6

AlloySteel Tee: ASTM/ ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91DuplexSteel Tee: ASTMA 815, ASME SA 815 UNS NO S31803, S32205. Material No. 1.4462

Nickel Alloy Tee: ASTM / ASME SB 336 UNS 2200 （ NICKEL 200 ）， UNS 2201（NICKEL 201 ）， UNS 4400 （MONEL 400 ）， UNS 8020 （ ALLOY 20 / 20 CB 3, UNS 8825INCONEL （825）， UNS 6600 （INCONEL 600 ）， UNS 6601 （ INCONEL 601 ）， UNS 6625（INCONEL 625）， UNS 10276 （ HASTELLOY C 276 ）